Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateRestoration Company in Bloomington, CA
Fire damage restoration in Bloomington means working inside wood-frame stucco homes built between the 1950s and 1970s, where heat and smoke move through wall cavities and attics differently than in newer construction. Santa Ana wind events push fire embers across the Santa Ana River wash into residential streets, and kitchen fires in older homes with original wiring remain a year-round risk. Clean Slate Water Damage handles the full fire recovery cycle, from board-up through structural repair, so Bloomington property owners deal with one team instead of three. Call (888) 508-8745 when you need someone on-site.
Why Bloomington Homes Are Different
Bloomington sits as an unincorporated San Bernardino County community, which changes how restoration work gets permitted, documented, and closed out. There is no city hall reviewing permits; county building and safety staff handle inspections, and that process moves at a different pace than in neighboring incorporated cities like Rialto or Fontana. Homes here are predominantly mid-century tract and ranch builds with original galvanized or early copper plumbing, wood-frame stucco construction, and a meaningful share of additions or converted garages done without permits. Those unpermitted spaces surface when a restoration crew opens a wall after a leak or fire, and they add a code-sensitive layer to every rebuild decision.
The climate swings hard. Summers bring intense heat and UV exposure that dries out framing, cracks stucco, and bakes roofing materials. Winter rain events then exploit every one of those cracks, driving water into walls and ceilings that have been quietly degrading for months. Because Bloomington has no city sewer, most homes run on septic systems, and drainage problems around foundations compound water intrusion in ways that do not exist in cities with municipal infrastructure. Restoration here is rarely a single-source problem; it is usually plumbing or roof failure meeting drainage failure, with hidden damage already underway.
Restoration work we handle
Our Main Bloomington Services
Most Bloomington calls to Clean Slate Water Damage start with water or mold, and those two problems usually arrive together. These are the two services Bloomington homeowners request most, each with its own dedicated page covering local conditions in detail.
Water Damage Restoration in Bloomington
Water intrusion in Bloomington homes tends to hide inside original plumbing runs from the 1960s and 1970s, behind stucco walls, and under slab foundations with aging supply lines. When a winter storm hits, the same homes show roof leaks where Santa Ana-season heat already compromised flashing and underlayment. Clean Slate Water Damage brings Dri-Eaz dehumidifiers, Phoenix air movers, and the Injectidry system to dry wall cavities and subfloors without needless demolition. That non-invasive drying matters in Bloomington, where opening a wall can reveal unpermitted additions that trigger county code review. See the full scope on our Water Damage Restoration in Bloomington page.
Mold Remediation in Bloomington
Mold in Bloomington follows the moisture: stucco walls that never fully dried after a leak, bathrooms in older homes with inadequate ventilation, and crawlspaces over damp soil where septic drainage has been less than ideal. The dry exterior climate does not prevent mold because wall cavities and subfloor spaces hold moisture long after surfaces feel dry. Clean Slate Water Damage performs mold remediation in alignment with IICRC standards, using professional-grade drying and containment equipment to remove colonized material and correct the moisture source. For Bloomington-specific mold guidance, read Mold Remediation in Bloomington.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Fire Damage Restoration in Bloomington
Fire damage restoration in Bloomington typically follows one of two patterns: a kitchen fire in a mid-century home with original electrical circuits, or Santa Ana wind-driven embers that ignite dry brush along the wash and threaten rooflines and eaves. Heat pushes soot into every cavity, and smoke odor settles into porous surfaces throughout the structure, even in rooms that never saw flame. Clean Slate Water Damage restores the property to pre-loss condition, starting with emergency board-up and moving through structural drying, soot removal, odor elimination, and the rebuild work that returns the home to service. Our full fire restoration capability is outlined on the Fire Damage Restoration hub page.
Fire Damage Restoration Company
Signs you need it
You need a full fire damage restoration company when flames, heat, or smoke have affected structural materials in any part of the property, with charring, warped framing, or compromised drywall visible even after the fire is out.
What it costs in Bloomington
Full fire damage restoration in Bloomington typically ranges from $4,800 for a contained kitchen fire to $48,000 for whole-home structural recovery, depending on the square footage burned and the extent of heat damage to framing.
How we do it
We board up and secure the structure first, document every damaged surface for the insurance file, remove charred materials, dry any water left by firefighting, and then begin structural repairs while coordinating directly with San Bernardino County inspectors.
Smoke Odor Removal
Signs you need it
You need smoke odor removal when the building still smells of smoke days or weeks after a fire, or when soot residue keeps reappearing on cleaned surfaces because porous materials are releasing trapped particles.
What it costs in Bloomington
Smoke odor removal in Bloomington generally runs from $2,800 for a single room to $12,000 for whole-home treatment, with the higher end of that range common when smoke reached attic insulation and ductwork.
How we do it
We run industrial air scrubbers to filter suspended particles, seal and clean affected surfaces, deploy thermal fogging or ozone treatment where appropriate, and clean or replace HVAC components and insulation that hold odor.
What Fire Damage Restoration Costs in Bloomington
| Item | Typical range in Bloomington |
|---|---|
| Emergency board-up and site stabilization | $900 – $3,200 |
| Smoke and soot removal from main living areas | $2,800 – $12,000 |
| Structural reconstruction and finish work | $4,800 – $48,000 |
Bloomington fire jobs run higher when the county requires opening unpermitted additions to current code, or when heat reached the attic and exposed old wiring that must be replaced before drywall goes back.
Do you handle the insurance claim for fire damage?
We document every step with photos, written scopes, and itemized line items, then work directly with your adjuster so the claim reflects actual restoration needs, not just surface cleaning. Call (888) 508-8745 with your claim number.
Can you seal or board up a Bloomington home the same day?
Yes. We dispatch crews to Bloomington for same-day emergency board-up and tarping so the structure is secured before wind, rain, or intrusion adds to the loss. Call (888) 508-8745 for immediate dispatch.
Brands We Service in Bloomington
Our restoration trucks carry Dri-Eaz, Phoenix, and XPOWER drying equipment, plus Injectidry systems for non-invasive wall and subfloor drying. Common replacement parts for these professional-grade systems are stocked locally or available within one business day. Learn more about our brands and equipment capabilities.
See the difference
Before
After
Before
After
Before
AfterPricing for Restoration Company in Bloomington, CA
| Service | Typical range in Bloomington |
|---|---|
| Emergency board-up and site stabilization | $900 – $3,200 |
| Smoke and soot removal from main living areas | $2,800 – $12,000 |
| Structural reconstruction and finish work after fire | $4,800 – $48,000 |
| Water removal and structural drying after major intrusion | $2,400 – $10,000 |
| Mold remediation for a single contained room | $1,600 – $5,500 |
| Whole-home mold remediation | $7,000 – $24,000 |
| Pool and spa leak investigation and repair | $700 – $3,500 |
| Roof tarping and emergency water mitigation | $900 – $3,200 |
Bloomington pricing runs higher when county permits pull unpermitted additions into scope, when septic-related drainage failures mean correcting the moisture source before drying finishes, or when Santa Ana-season roof damage has gone unnoticed. Clean Slate Water Damage puts the scope in writing before work begins, so there is no surprise line item added after the crew is inside.
Neighborhoods We Serve in Bloomington
Clean Slate Water Damage serves every residential street in the 92316 ZIP code, from the older ranch-home blocks near Valley Boulevard to the properties backing up to the Santa Ana River wash. Our crews respond to Bloomington sites throughout the day, with emergency dispatch available for water and fire calls.
- Bloomington proper, including homes along Valley Boulevard and Cedar Avenue
- Residential streets west of the Santa Ana River wash
- Neighborhoods near Mary B. Lewis Elementary and Bloomington High School
- Homes off Riverside Avenue and Jurupa Avenue corridors
- Properties along Slover Avenue and the northern edge of the 92316 ZIP
Service Area – Cities Near Bloomington
Beyond Bloomington, Clean Slate Water Damage covers neighboring San Bernardino County communities, including Fontana, CA, Rialto, CA, Glen Avon, CA, and Pedley, CA. Each of those cities has its own restoration conditions, from municipal sewer systems to newer construction, and our crews carry the same professional-grade equipment regardless of the city.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Restoration Company in Bloomington
We dispatch to Bloomington the same day for water and fire emergencies, usually within a few hours of your call. Septic and drainage failures here worsen fast, so the sooner equipment is running, the less wall and floor removal is needed.
Yes. Because Bloomington is unincorporated, structural repairs and rebuilds go through San Bernardino County building and safety rather than a city hall. We document work to meet county inspection standards and flag unpermitted areas before work begins.
We work directly with property managers and landlords, schedule containment and drying around occupied units, and provide written scopes and photo documentation that both you and your insurance carrier can review. Call (888) 508-8745 to coordinate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local damage restoration pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bloomington Customers Say
"Supply line let go under the upstairs bathroom at two in the morning. They had a crew here inside ninety minutes, water extracted before dawn, and dehumidifiers running by breakfast. The ceiling below was saved."
— Grace Nguyen"Post fire smoke damage. The smell that I was sure was permanent is completely gone."
— Kristen Rhodes"Dealt directly with the insurance adjuster and documented everything with photos and readings. Our claim went through without a single dispute."
— Rosa Delgado