Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateFast, Reliable Water Damage Restoration Across Fontana
A slab leak or wind-driven rain event in Fontana doesn’t wait, and neither should you. Clean Slate Water Damage gets a crew to Fontana neighborhoods fast, with professional-grade drying systems already on the truck. We know the 92337 and 92336 north-side tracts get hit hard when Santa Ana winds push rain sideways through stucco penetrations, and we know the older 92335 south-side slabs hide moisture in ways a surface reading will miss. Call (888) 508-8745 and you’ll speak to someone who understands Fontana’s housing stock, not a call center reading a script.
Why Clean Slate Water Damage Is Fontana’s Preferred Water Damage Restoration Company
Fontana property owners keep our number because we treat this city’s two housing realities as separate jobs, not one template. South of the 10, the Kaiser Steel-era homes in 92335 have steel framing that rusts on a different timeline than wood. North of the 210, the stucco tracts in 92336 and 92337 face wind-driven rain that finds every roof edge and wall penetration. A restoration crew that doesn’t know the difference will dry the wrong way, miss the rust scoping, and leave a cavity wet behind the drywall.
Noel Carrasco built Clean Slate around a simple standard: restore the property to pre-loss condition, and prove it with documentation the adjuster can read. Our crews run Injectidry panels to force dry air into wall cavities and subfloors without tearing out drywall, and we log moisture readings throughout the job. That’s the difference between a patch job and a verified dry structure. The equipment on our trucks is what the top restoration firms nationwide run: Dri-Eaz dehumidifiers, Phoenix air movers, XPOWER extraction units. Not rental-store gear.
Fontana homeowners also value that we handle the full damage cycle under one roof: Water Damage Restoration, mold remediation, and fire damage restoration. When a water loss turns into a mold question two weeks later, you’re not calling a second contractor and explaining the whole job again. One team, one standard, one point of contact from first extraction to final clearance check.
Our work aligns with IICRC standards, and we maintain RIA membership. That matters in Fontana because so many homes here sit on slab foundations where moisture migrates sideways into flooring and wall cavities. An uncredentialed crew will dry the surface, hand you a bill, and leave the wet cavity behind. We won’t.
Restoration work we handle
Water Damage Cleanup in Fontana
Water Damage Cleanup in Fontana typically runs $1,200 to $3,800 depending on the size of the affected area, the category of water involved, and whether walls or flooring need cavity drying. For a single room with clean Category 1 water from a supply line, most Fontana jobs land between $1,200 and $2,200. When the water is Category 2 or 3, or when it has wicked into a slab-adjacent wall cavity in a 92335 tract home, expect $2,500 to $3,800 because of the extra containment and non-invasive drying time.
Cleanup here means extraction first, then a real drying plan. Fontana’s slab-on-grade construction means water doesn’t pool downward. It spreads sideways under flooring and up into drywall. Our techs map moisture across the affected area with meters, not eyes, because a wall that looks dry at the surface can still hold 30% moisture content at the base plate.
Extraction and Containment
We pull standing water with truck-mounted and portable extraction units, then set containment with air movers and Dri-Eaz dehumidifiers. Containment isn’t optional in Fontana homes built before 1980. The older south-side floor plans have adjoining rooms with shared wall cavities, so moisture travels fast into spaces that never got wet directly.
Non-Invasive Cavity Drying
When water gets behind drywall or under tile, we don’t automatically tear everything out. Injectidry panels push dry air directly into the wall cavity and subfloor, drying the structure without demolition. That means less rebuild cost and a faster return to pre-loss condition for Fontana homeowners.
Emergency Water Damage Restoration in Fontana
Emergency Water Damage Restoration calls in Fontana are most often slab leaks, burst supply lines, and wind-driven rain intrusion during Santa Ana events in 92336 and 92337. For a burst pipe or supply line failure, Fontana homeowners typically pay $1,800 to $4,500 for full emergency response including extraction, drying equipment, and monitoring. Roof edge and stucco penetration leaks from a wind-driven storm usually run $1,500 to $3,200 depending on how many wall cavities got wet before we arrived.
The clock matters. A wet wall cavity in Fontana’s climate will support mold growth within 48 to 72 hours, faster in the summer when indoor temperatures stay high. The sooner we get extraction and air movement going, the less material gets replaced. We answer calls from Fontana at all hours and dispatch from our Pomona base, which puts most Fontana neighborhoods within a 25 to 40 minute response window depending on traffic on the 10 or the 210.
Slab Leak Response
Fontana’s slab-on-grade construction means a supply line break under the foundation sends water sideways into flooring, baseboards, and wall cavities. We extract what we can reach, then set up cavity drying and monitor daily until the structure reads dry. Our drying logs go to you and your adjuster, so no one has to guess when the job is actually done.
Wind-Driven Rain Intrusion
The north-side tracts near 92336 catch some of the worst wind-driven rain in the Inland Empire. Water pushes past roof edges, window flashings, and stucco penetrations, then runs inside the wall. These losses don’t look like a slab leak, and treating them like one means the same ingress point re-wets the cavity after we leave. We scope the roof edge and exterior penetration as part of the restoration, not an afterthought.
Trusted Brands We Service in Fontana
Fontana homes run the full range of plumbing and building products, and we service the damage regardless of what failed. That includes homes with original 1950s galvanized supply lines in the south-side 92335 tracts and newer PEX and copper systems in the north-side 92336/92337 developments. We carry the drying equipment to handle any of it: Dri-Eaz LGR dehumidifiers, Phoenix air movers, and XPOWER extraction units on every truck. If a specialty part or material is needed for a rebuild, our Fontana customers get direct access to our supplier network rather than waiting on a big-box backorder. The equipment on the truck is what the leading restoration firms run nationwide. That standard doesn’t drop because the job is in Fontana instead of a coastal city.
See the difference
Before
After
Before
After
Before
AfterCommon Water Damage Restoration Problems We See in Fontana Homes
- Wind-driven rain behind stucco in 92336 and 92337. Santa Ana winds push rain horizontally, and it finds the gap behind window flashing, the roof edge, or any stucco penetration. The wall cavity wets from the top down, which looks nothing like a slab leak, so crews who miss the exterior scoping leave the ingress point open and the cavity re-wets.
- Steel-frame drying mistakes in south Fontana’s Kaiser-era homes. The 92335 homes near the old Kaiser plant have steel studs and thin-wall systems. A standard wood-frame drying protocol will overcook the metal, and nobody scopes for rust. The steel dries differently, rusts differently, and needs a metal-aware assessment from the first day.
- Slab-on-grade moisture migration. Fontana has almost no basements. Water moves sideways under flooring and up into wall cavities. If a crew only checks surface moisture and doesn’t map across the slab, they’ll sign off on a job with wet cavities still trapped under the floor.
- Original plumbing failures in older 1950s-60s tract homes. The south-side 92335 homes still carry a lot of original galvanized supply lines. When one lets go, the water has years of accumulated scale inside the pipe, which pushes the water into Category 2 or 3 faster than a clean-source leak. That changes what we save and what we cut out.
Pricing for Water Damage Restoration in Fontana, CA
Small single-room clean water extractions in Fontana start around $1,200 to $1,800. A burst supply line or slab leak affecting two or more rooms, with cavity drying and daily monitoring, typically lands between $2,200 and $4,500. Full flood cleanup or Category 3 water that requires demolition, sanitizing, and rebuild scoping runs $3,800 to $8,000 or more, depending on square footage and what materials need replacement. What moves the number is the category of water, how far it wicked into wall cavities and under flooring, and whether the home is a steel-frame south-side build or a wood-frame north-side tract. Every Fontana estimate includes a written scope before equipment goes in, so you approve the work before we start. Call (888) 508-8745 for a free estimate. We’ll walk the affected area, map the moisture, and give you a number you can take to your adjuster.
We Also Serve Cities Near Fontana
Our crews regularly run from Pomona into Fontana and the surrounding communities. The same professional-grade drying systems and IICRC-aligned process cover Bloomington, Rialto, Glen Avon, and Pedley. If you’re managing a property in any of these areas and water is moving, call (888) 508-8745 and we’ll get a crew headed your way.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Water Damage Restoration in Fontana
The south-side Kaiser Steel-era homes in 92335 have steel framing and thin-wall systems, and steel dries and rusts on a completely different schedule than wood. A wood-frame drying protocol will overcook the metal and miss the rust scoping entirely, so those jobs need a metal-aware assessment from the first moisture reading. Our techs know the difference and document it in the drying log. If you have an older south Fontana home with a water loss, call (888) 508-8745 before someone runs a generic drying plan on steel framing.
Two sources dominate. In the north-side tracts of 92336 and 92337, the Santa Ana winds push rain past roof edges, window flashings, and stucco penetrations, wetting wall cavities from the top down. In the south-side 92335 slab-on-grade homes, supply line breaks under the slab send water sideways into flooring and walls. The source changes the scope, and we identify it before drying starts so the same ingress point doesn’t re-wet the structure. Call (888) 508-8745 for an evaluation if you know you have water but aren’t sure where it’s coming from.
In Fontana’s climate, mold can start in 48 to 72 hours in a wet wall cavity, and faster during summer when indoor temperatures hold above 80 degrees. The first 24 hours are when extraction and air movement do the most to save drywall, flooring, and framing. The longer water sits, the more material gets cut out and replaced. If water appeared in the last day, call (888) 508-8745 now, not after the weekend.
Category 1 is clean water from a supply line or pipe. We can usually dry and save affected materials. Category 2 has significant contamination, like washing machine overflow or sump water, and some materials may need removal. Category 3 is grossly contaminated water from sewage or outside flooding, and affected porous materials come out. Category drives the scope and the price, and we’ll walk you through it in writing before work starts. Call (888) 508-8745 and we’ll explain what category your loss falls into and what that means for your home.
Fontana’s slab foundations mean water doesn’t drain down. It moves sideways under flooring and up wall cavities, so we map moisture across the slab with meters, not just at the visible wet spot. Then we set Injectidry panels to force dry air into the wall cavities and subfloor without tearing everything out, and we monitor daily until the structure reads dry. The drying log goes to you and your adjuster so the pre-loss condition is documented, not claimed. Call (888) 508-8745 for a free estimate on slab-related water damage in Fontana.
If you have active water in your Fontana home right now, stop reading and call (888) 508-8745. We’ll walk you through the first steps, dispatch a crew from Pomona, and get drying equipment on your loss within hours. Estimates are free, the scope is in writing before work starts, and the goal is a structure restored to pre-loss condition, verified by readings and documented for your adjuster.
Written by Noel Carrasco, Owner at Clean Slate Water Damage, serving Fontana and the surrounding communities with professional-grade restoration since day one.