Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateMold Remediation in Wrightwood, CA
Mold remediation in Wrightwood typically costs $1,800 – $6,500 depending on how far the growth has spread and whether the source is a burst supply line, an ice dam, or long-term crawlspace moisture. Most Wrightwood jobs we handle involve older mountain cabins where water sat undetected for weeks, so the visible mold is usually only part of the story. Call (888) 508-8745 for a free estimate and we’ll send a crew up the 138 or Lone Pine Canyon Road within hours, not days.
Fast, Reliable Mold Remediation Across Wrightwood
Wrightwood is a different animal from the flatlands. At 6,000 feet in the San Gabriel Mountains, homes here deal with snow load, ice dams, freeze-thaw cycles, and long stretches of vacancy that let small leaks turn into serious mold problems before anyone notices. We’ve worked on cabins off Highway 2, homes near the ski slopes, and older properties along the 92397 corridor, and we know what Wrightwood’s housing stock does when moisture gets in. Our Mold Remediation team brings professional-grade drying equipment up the mountain, runs full moisture mapping before we touch anything, and restores your property to pre-loss condition rather than just killing surface mold and hoping it doesn’t come back. If you’re standing in a cabin right now looking at black spots on the drywall or smelling that musty attic odor, call us at (888) 508-8745. We’ll talk you through what you’re seeing and get a crew dispatched to Wrightwood the same day.
Restoration work we handle
Why Clean Slate Water Damage Is Wrightwood’s Preferred Mold Remediation Company
Wrightwood homeowners and second-home owners call us because we understand the vacancy problem. Most mold here isn’t caused by a dramatic flood. It’s caused by a supply line that froze and cracked while the cabin sat empty for three weeks in January. By the time a neighbor notices water staining the siding or a door swollen shut, the mold clock has been running for hundreds of hours, not twenty-four. That’s the classic Wrightwood second-home surprise, and we’ve handled enough of these to know that the visible mold is always the tip of the iceberg.
Our crews are trained to trace moisture back to its source before remediation starts. That matters in Wrightwood, where an ice dam at the roof edge can keep re-wetting the same wall cavity every thaw cycle. Skip that step and you’ll be redoing the job next spring.
We’re aligned with IICRC standards and our team uses Dri-Eaz, Phoenix, and XPOWER equipment, not hardware-store rentals. When we set containment and run a Phoenix dehumidifier in a Wrightwood cabin, we’re pulling moisture out of framing, subfloor, and wall cavities, not just drying the air. That’s the difference between remediation that holds and remediation that fails inspection.
Mold Removal Contractor in Wrightwood
Mold Removal Contractor in Wrightwood is the role we play most often for second-home owners and full-time residents alike. The job starts with identifying the water source, then setting containment to prevent cross-contamination, removing affected materials, and running commercial drying equipment until moisture readings in the framing tell us the structure is actually dry. In Wrightwood, that often means working in a cabin that’s been locked up for weeks, with no heat, frozen plumbing, and a crawlspace we have to belly into to check the pier-and-beam foundation.
A typical mold removal job in Wrightwood runs $2,200 – $5,800 depending on square footage and how many rooms are involved. A contained bathroom job might come in on the lower end. A full crawlspace and subfloor remediation under a three-bedroom cabin will push toward the higher end and beyond if structural drying takes several days, which it often does at 6,000 feet in winter.
Containment and Air Scrubbing
We set physical containment around the affected areas before demolition starts. Air scrubbers with HEPA filtration run throughout the job so mold spores don’t drift into adjoining rooms while we remove contaminated drywall or insulation.
Structural Drying and Verification
Once the affected materials are out, we run professional-grade drying equipment and take repeated moisture readings in wall cavities, subfloors, and framing. We don’t hang new drywall over damp framing. Wrightwood’s freeze-thaw cycles will find any residual moisture and feed new growth within months.
Bathroom Mold Removal in Wrightwood
Bathroom Mold Removal in Wrightwood is one of the most common calls we take from full-time residents and rental property owners. Mountain bathrooms are tight, often under-ventilated, and sit in cabins with wood framing and drywall that soaks up humidity like a sponge. Add a leaky shower valve or a failed wax ring under the toilet, plus a cabin that sits at 45 degrees all winter, and you’ve got the recipe for recurring mold on the ceiling, behind the tub surround, and under the vanity.
Bathroom mold removal in Wrightwood typically runs $900 – $2,500 when we can contain the work to the bathroom itself and the framing isn’t saturated. That includes removing affected drywall or baseboard, treating the framing with antimicrobial, running drying equipment, and preparing the space for rebuild. If the mold crawled down into the subfloor or into an adjacent wall cavity, expect the higher end of that range.
Ventilation Assessment
Every bathroom mold job in Wrightwood includes a look at the exhaust fan. Older cabins often have undersized fans or none at all, and at this elevation the dry mountain air outside doesn’t help if the wet air can’t get out. We’ll tell you what needs to change before we hand the room back.
Leak Source Tracing
Mold on the bathroom ceiling in a Wrightwood cabin is frequently a roof leak or ice dam, not a bathroom ventilation problem. We trace the moisture back before we treat the visible mold. Remediating bathroom mold without fixing the source means you’ll be calling us again next season.
Trusted Brands We Service in Wrightwood
Wrightwood homeowners run a range of equipment from older furnace and boiler systems to modern mini-splits, and the moisture problems we see cross all of it. Our remediation process doesn’t depend on any one brand, but our equipment does: we run Dri-Eaz and Phoenix dehumidifiers and air movers that hold up in unheated cabins and cold crawlspaces where lesser machines freeze up. If your Wrightwood cabin has a boiler that burst, a water heater that let go, or a bathroom exhaust fan that never worked right, we’ll remediate the mold that followed and get the structure back to pre-loss condition. We stock common filters and consumables in our vehicles so we’re not driving back down the mountain for a part mid-job.
See the difference
Before
After
Before
After
Before
AfterCommon Mold Remediation Problems We See in Wrightwood Homes
- Vacancy masking the clock. Cabins sit empty between weekend visits, so a category 1 supply-line leak quietly degrades into category 2 or 3 conditions and active mold before anyone walks in. Jobs that look small from the doorway are often already widespread behind the drywall.
- Ice dams and snowmelt re-wetting. Wrightwood’s freeze-thaw cycles push water in at the roof edge and wall plates. Crews that remediate interior mold without tracing the ice-dam source watch growth return after the next storm. We find the water path first.
- Wood siding and pier-and-beam foundations holding moisture. Legacy wood siding absorbs water, and raised pier-and-beam foundations create a crawlspace microclimate where surface readings miss hidden moisture. Skipping deep moisture readings in the crawlspace leaves hidden growth behind fresh drywall.
- Unheated spaces slowing every step. At 6,000 feet, structural drying takes longer in winter. Air movers and dehumidifiers work, but the cold framing releases moisture slowly. Rushed jobs that skip the drying phase are the ones that fail a follow-up inspection.
Pricing for Mold Remediation in Wrightwood, CA
Every Wrightwood job is different because the water source, the square footage, and the cabin construction all vary. A contained bathroom mold removal starts around $900. A single-room remediation with structural drying typically lands between $1,800 and $3,200. Full crawspace and subfloor remediation under a pier-and-beam cabin runs $4,500 to $6,500 or more depending on how long the water ran and whether structural materials need replacing. What you’re paying for is moisture mapping, source tracing, containment, the actual mold removal, professional-grade drying with verified moisture readings, and antimicrobial treatment. We provide a written scope before work starts and photo documentation the whole way through. Call (888) 508-8745 for a free estimate, and we’ll give you a real number based on what’s actually happening in your Wrightwood home.
We Also Serve Cities Near Wrightwood
Our crews run up the 15 and across the 138 regularly, so we’re already serving the communities around Wrightwood as well. If you’re in Wrightwood, Piñon Hills, Phelan, Oak Hills, or San Antonio Heights, you’re inside our normal response area. The same certified crew, the same professional-grade equipment, the same written scope before work begins.
Serving Wrightwood, CA — Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Mold Remediation in Wrightwood
Because the cabin sat empty and the water ran undetected for days or weeks. A supply line freezes and cracks, or an ice dam forms at the roof edge, and by the time you come back up the mountain, the mold has had hundreds of hours to establish. Wrightwood’s vacancy pattern is the single biggest reason small leaks turn into full remediations. If you own a second home here, have a neighbor check the exterior after every thaw cycle. If you already see mold, call us at (888) 508-8745 and we’ll run full moisture mapping before anything gets torn out.
Yes, and in Wrightwood it matters more than most places because a clean water leak degrades over time. A category 1 supply-line leak in an occupied home gets caught in hours. The same leak in a vacant cabin sits for weeks and degrades to category 2 or 3 water by the time anyone finds it. That changes the remediation scope, the containment requirements, and what can be dried versus what has to be removed. We treat the water category as part of the assessment, not an afterthought.
We get under the cabin, run moisture reading in the subfloor and joists, and remove any insulation that’s been wicking moisture. Most pier-and-beam cabins in Wrightwood have a dirt or gravel crawlspace that holds humidity at ground level, so we often install a vapor barrier after drying. Skipping the crawlspace is how you get a “successful” mold job that comes back six months later.
Technically yes, but you’d be wasting money. The mold will return as soon as the next thaw cycle pushes water into the same wall cavity. Our process traces the water source before we start remediation, and if we find an ice dam or a leaking valve, we’ll tell you what needs to happen before the bathroom gets put back together. We can coordinate that repair with your plumber or roofer, but the source has to be addressed.
Shut off the main water supply, drain the lines if possible, and set the thermostat no lower than 50 degrees if the cabin is heated. Leave cabinet doors under sinks open so warm air reaches the pipes. If you have a neighbor or property manager, have them walk the exterior after each major snowmelt and check for water staining on the siding. If you come back to a swollen door or a musty smell, call us at (888) 508-8745 before you open anything up. Disturbing the mold spreads spores into rooms that weren’t affected.
Written by Noel Carrasco, Owner at Clean Slate Water Damage, serving Wrightwood and surrounding mountain communities.
Mold in a Wrightwood cabin doesn’t wait. The sooner we get moisture mapping, containment, and drying equipment on site, the less ends up in a dumpster. Call (888) 508-8745 now and we’ll give you a straight answer on cost and timeline.