Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateTrusted Mold Remediation for Pomona Homeowners
Mold remediation in Pomona typically costs between $1,800 and $6,500, with most jobs running $3,200 for a contained bedroom or bathroom. See our Mold Remediation cost guide for full pricing details. We respond fast because Pomona’s Inland Empire heat and older housing stock with original plumbing create conditions where a small leak turns into mold quickly. Clean Slate Water Damage operates with professional-grade equipment from Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry, and we work in alignment with IICRC, RIA, and IFA industry standards. Noel Carrasco leads our team with a direct promise: verify the moisture source, contain the affected area, remove contaminated material, and return your property to pre-loss condition. Call (888) 508-8745 for a no-obligation assessment.
Mold Removal Service
Mold Removal Service is the hands-on phase of remediation: physically cutting out drywall, carpet, insulation, and any other material mold has penetrated, then cleaning what can be saved. You need it when surface cleaning isn’t enough, when mold has grown into porous materials and keeps returning after wipe-downs. Clean Slate Water Damage removes colonized materials under negative air pressure so spores don’t spread through your Pomona home during the job. Expect $1,500-$3,800 for a typical bathroom or closet, more if framing requires remediation.
Containment and Negative Air
We seal the work area with 6-mil polyethylene and run HEPA-filtered negative air machines to keep airborne spores from migrating. This is standard IICRC-aligned practice, not an add-on. Pomona homes with central HVAC require extra attention to isolate returns and supply vents before any material comes out.
Material Removal and Disposal
Mold that has penetrated drywall, baseboards, or carpet padding cannot be “cleaned” back to safe condition. We cut it out, bag it inside the containment zone, and dispose of it per California waste handling rules. The goal is removal, not hiding it behind paint.
Restoration work we handle
Mold Remediation Services
Mold Remediation Services cover the full project from first inspection to final clearance, including moisture correction, containment, removal, and structural drying. You need it whenever visible mold covers more than roughly 10 square feet, or when there’s a persistent musty odor without visible growth. Clean Slate Water Damage handles the entire sequence under one roof, using Dri-Eaz dehumidifiers and Injectidry drying systems to address the water that feeds the mold. A complete Mold Remediation – Pomona job typically runs $2,800-$6,500 depending on square footage and how many rooms are involved.
Moisture Source Correction
Removing mold without fixing the water source is a temporary fix. We trace moisture with thermal imaging and moisture meters, then correct the plumbing, roof, or drainage issue before remediation begins. That sequencing matters more than anything else we do.
Post-Remediation Clearance
After removal and drying, we clean all surfaces in the containment area with HEPA vacuums and antimicrobial treatments. The property is left ready for reconstruction, which we can coordinate through our fire and water restoration capabilities. You’re not handed a half-finished job and told to find a contractor.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Professional Mold Removal
Professional Mold Removal means using containment, engineering controls, and certified methodology rather than bleach and a scrub brush. You need it when mold covers a large area, when anyone in the home has respiratory sensitivity, or when mold has returned after a previous attempt. Clean Slate Water Damage performs work in alignment with IICRC standards, which means we document moisture readings, scope the project in writing, and verify the result before we leave. Expect $2,000-$5,500 for professional mold removal in Pomona, with the higher end reflecting multi-room contamination.
HEPA Filtration and Air Scrubbing
We run air scrubbers continuously during removal, pulling 99.97% of particles down to 0.3 microns from the air moving through the containment zone. That protects the rest of your home from cross-contamination. In Pomona’s older post-war homes, this is often the difference between a clean job and a lingering odor complaint.
Documented Scope Before Work Starts
Before we cut anything, you get a written scope that lists exactly what we’re removing, what equipment we’ll run, and what the job won’t touch. That written agreement protects you from the overselling that gives this industry a bad name. Adjusters respond better to itemized scopes, too.
Mold Inspection
Mold Inspection is a systematic assessment that identifies mold growth, moisture sources, and the extent of contamination, often including surface or air sampling. You need it when you suspect mold but can’t see it, when a real estate transaction requires documentation, or when a previous remediation didn’t solve the smell. Clean Slate Water Damage inspects with moisture meters and thermal imaging cameras, then explains in plain language what we found, what it means, and what actually needs doing. A mold inspection in Pomona typically runs $300-$700, waived if you proceed with remediation.
Thermal Imaging and Moisture Mapping
Our inspection starts with a thermal camera scan of walls, ceilings, and floors to find temperature anomalies that indicate trapped moisture. We map those readings with pin-type moisture meters so we know where the water is, not just where the stain is. This mapping guides the scope of the entire remediation.
Sampling and Lab Analysis
When sampling is needed, we take air and surface samples and send them to an independent lab for analysis. Results confirm spore types and concentrations, which matters if black mold is suspected or if a physician is involved. We interpret the lab report for you and fold the findings into the remediation plan.
Mold Removal Specialist
A Mold Removal Specialist is a technician trained specifically in containment, safe removal, and moisture correction, rather than a general handyman who also “does mold.” You need one when the job involves more than a small patch, when mold is inside wall cavities or HVAC ducting, or when insurance is paying for the work. Noel Carrasco leads our Pomona mold removal specialists, and the team works with the same Injectidry and Phoenix equipment used by top-tier restoration firms nationwide. We also serve nearby communities with the same standards, including Montclair Mold Remediation. Specialist-led remediation in Pomona runs $2,500-$6,000, with cost driven by containment complexity and affected material volume.
When to Insist on a Specialist
If mold has spread behind multiple walls or into flooring systems, a specialist’s containment and drying expertise prevents a partial fix that blooms back in six months. Insurance carriers also tend to approve scopes more readily when they come from a credentialed restoration team rather than a general contractor. The extra cost upfront almost always saves money on round two.
What We Bring to the Job
Every Pomona job gets commercial-grade air scrubbers, HEPA vacuums, and Dri-Eaz LGR dehumidifiers, not rental-store gear. Our team uses the Injectidry system to pull moisture from wall cavities and subfloors without unnecessary demolition. That means we often save framing and flooring that a generalist would tear out.
Black Mold Removal
Black Mold Removal targets Stachybotrys chartarum and other toxigenic mold species that require stricter containment and personal protective equipment than common mold varieties. You need it when dark greenish-black mold is present, when there’s been prolonged water exposure, or when lab results confirm a toxigenic species. Clean Slate Water Damage handles black mold in Pomona with full-scale containment, HEPA filtration, and IICRC-aligned removal protocols. Black mold removal typically runs $3,000-$8,000 due to the additional controls and material disposal required.
Stricter Containment Protocols
Black mold work requires full-face respirators, full-body protective suits, and sealed containment zones with staged entry chambers. We treat every black mold job as if spores may be toxigenic until lab results say otherwise. That caution protects our crew and your family.
Source Trace and Full Removal
Black mold rarely appears without a serious, ongoing moisture problem behind it. We trace that source, correct it, and remove affected materials completely rather than attempting surface treatment. Half-measures with toxigenic mold are worse than no measures at all.
Mold Removal Contractor
A Mold Removal Contractor is a licensed restoration company that holds the credentials, equipment, and insurance to perform remediation legally and correctly, as opposed to a handyman working outside their scope. You need one for any mold job beyond a quick surface wipe, especially when a property manager or insurer is involved. Clean Slate Water Damage is that contractor for Pomona: a restoration firm aligned with IICRC, RIA, and IFA standards, running industrial-grade Dri-Eaz and Injectidry equipment. Contractor-performed remediation in Pomona runs $2,000-$6,500, and the difference shows in documentation and verified results.
Insurance-Ready Documentation
We provide photo documentation, moisture mapping, equipment logs, and itemized scopes that adjusters can process without back-and-forth. Direct adjuster coordination is part of every insurance job we take. That saves you the most stressful part of a mold claim.
One Contractor, Full Restoration
Mold damage often comes with water damage underneath it, and sometimes fire damage in the same property. We handle all three disciplines, which means one point of contact from inspection through final clearance. Visit our home page to see the full scope of our water, mold, and fire restoration work.
Bathroom Mold Removal
Bathroom Mold Removal focuses on the most mold-prone room in Pomona homes: grout lines, shower surrounds, under-sink cabinets, and the wall cavity behind tile. You need it when mold recurs on caulk or grout, when there’s a musty smell near the shower, or when the vanity cabinet shows water staining underneath. Clean Slate Water Damage removes contaminated drywall, corrects ventilation, and treats surfaces so mold doesn’t return with the next shower. Expect $800-$2,800 for bathroom mold removal, with the higher end reflecting tile removal or subfloor work.
Ventilation and Humidity Correction
A bathroom that stays humid for two hours after every shower will grow mold again no matter how well we clean it. We check exhaust fan CFM, vent routing, and window seals as part of every bathroom mold job in Pomona. Fixing ventilation is just as important as removing the mold.
Cabinet and Vanity Remediation
Under-sink cabinets hide leaks for years, and by the time you see staining, the particle board is usually colonized through. We remove affected cabinetry, dry the wall cavity behind it with Injectidry equipment, and reset or replace as needed. It’s a contained job that prevents the mold from spreading into the adjacent wall.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
In Pomona, we see a lot of older construction and mid-century homes where the original dehumidification and ventilation systems were either never installed or have long since failed. Our equipment roster includes Dri-Eaz LGR dehumidifiers and Phoenix air movers, and we work extensively with the Injectidry system to dry wall cavities and subfloors without demolishing them. These are the same brands used by national restoration firms, and our technicians are trained to run them properly.
If your Pomona property has mold in a bathroom, a crawlspace, or behind cabinetry, we have the equipment and the training to address it. Whether your home is a 1940s bungalow near Ganesha Park or a newer build up in Phillips Ranch, we bring the same professional-grade systems and the same IICRC-aligned process to every job.
Signs You Need a Pro Right Now
- Musty odor that doesn’t fade: A persistent earthy smell means mold is actively growing somewhere hidden, usually inside a wall or under flooring. The odor is caused by microbial volatile organic compounds, and airing out the room won’t stop the source.
- Visible mold larger than a dinner plate: Once mold covers more than about 10 square feet, professional containment and removal is needed. DIY cleaning at that size sends spores into the air and spreads the problem.
- Water stains or bubbling paint: Discoloration on ceilings or walls indicates past or ongoing moisture intrusion. Mold follows moisture within 24-48 hours in Pomona’s climate, so the stain is usually hiding growth behind the surface.
- Recurring mold after cleaning: If mold returns to the same spot after scrubbing, the mycelium has penetrated the material and surface cleaning won’t reach it. That’s a removal job, not a cleaning job.
- Health symptoms that improve away from home: Congestion, coughing, or headaches that ease when you leave the property can indicate airborne mold exposure. A professional inspection with air sampling confirms whether mold is the culprit.
Our Process, Step by Step
- 1
Inspection and moisture mapping: We start with a visual assessment plus thermal imaging and pin-type moisture readings across the affected area. This creates a moisture map that tells us how far the problem extends behind walls and under floors, not just where the stain is.
- 2
Written scope and approvals: Before any work begins, you receive a written scope that itemizes what gets removed, what equipment runs, and what the job costs. For insurance claims, we provide the documentation your adjuster needs to approve the work.
- 3
Containment and air control: We seal the work area with 6-mil polyethylene, establish negative air pressure, and run HEPA-filtered air scrubbers. This keeps remediation from turning a one-room problem into a whole-house problem.
- 4
Material removal and structural drying: Colonized drywall, insulation, and flooring are cut out inside containment and bagged for disposal. Then we run Dri-Eaz dehumidifiers and, where needed, the Injectidry system to dry remaining framing and cavities without unnecessary tear-out.
- 5
Cleaning, treatment, and clearance: All surfaces inside containment are HEPA-vacuumed and treated with antimicrobial products. We verify moisture levels with meters before breaking down containment, then walk you through the results so you know the property is ready for reconstruction.
How Much Does Mold Remediation Cost in Pomona?
Mold remediation in Pomona varies widely based on how much material comes out and how many rooms are involved. A contained bathroom job typically runs $1,200-$2,800. A bedroom with closet runs $2,000-$3,800. A full bathroom plus adjacent bedroom, which is common when a leak went unnoticed, runs $3,500-$6,500. Black mold with toxigenic species confirmation pushes the range to $3,000-$8,000 because of stricter containment and disposal requirements.
- Containment and equipment setup: $400-$900, depending on room complexity and access
- HEPA air scrubbing and negative air: $300-$700 per 48-hour cycle
- Material removal and disposal: $800-$3,000, driven by square footage and material type
- Structural drying with Dri-Eaz and Injectidry: $500-$1,800, depending on how many cavities need drying
- Antimicrobial treatment and final cleaning: $300-$900
What affects the price most is whether framing needs drying or replacement, and whether HVAC ducting requires cleaning or sealing. To avoid overpaying, insist on a written scope that lists exactly what’s being removed before work starts, and ask whether sampling is necessary for your situation or optional. Our estimates in Pomona include the moisture map, the itemized scope, and everything we saw during inspection, so there are no surprise line items later. Call (888) 508-8745 for a free estimate.
Our Service Area Near Pomona
We serve Pomona and the surrounding Inland Empire communities, including La Verne, Claremont, Montclair, Chino, Ontario, Upland, and Rancho Cucamonga. For residents in neighboring areas, we offer the same professional-grade equipment and IICRC-aligned process we bring to Pomona. You can learn more about our Mold Remediation in La Verne or our Mold Remediation in Claremont pages for area-specific details. We also cover San Antonio Heights, Los Serranos, Yorba Linda, and Eastvale for larger remediation projects. Typical response time within the Pomona area is same-day or next-morning dispatch.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Mold Remediation in Pomona
Mold remediation is the process of identifying the moisture source, containing the affected area, removing colonized materials, drying remaining structure, and cleaning all surfaces to eliminate mold and prevent regrowth. It’s different from simple mold cleaning because it addresses the cause and the hidden growth, not just visible surface stains. Clean Slate Water Damage performs remediation in alignment with IICRC standards. Call (888) 508-8745 for an assessment of your Pomona property.
Most Pomona mold remediation projects take 3 to 7 days from containment setup through final clearance. Smaller bathroom jobs can finish in 2 to 3 days, while multi-room or black mold jobs may take 7 to 10 days including structural drying time. The drying phase is the longest part, and we use Injectidry and Dri-Eaz equipment to keep that timeline as short as possible. We’ll give you a written schedule before work starts.
Mold remediation in Pomona typically runs $1,800 to $6,500, with most jobs landing around $3,200. Smaller bathroom-only projects start around $1,200, while black mold or crawlspace jobs can reach $8,000. Your free estimate includes a written, itemized scope so you know the number before we cut anything. Call (888) 508-8745 and we’ll walk you through what your specific situation requires.
Mold remediation is covered by most homeowners policies when it results from a sudden, covered water event, like a burst pipe or an appliance failure. Mold from long-term leaks or lack of maintenance is often excluded, which is why we document everything and coordinate directly with your adjuster. Our photo documentation and moisture mapping give your insurer what they need to make a determination. We’ll help you navigate the claim either way.
For contained bathroom or single-room jobs, you can usually stay in the home, though we may recommend closing off the area with the HVAC isolated. For black mold remediation or multi-room projects, staying elsewhere during active removal is safer and more comfortable. We’ll tell you clearly during the inspection what your situation requires. The containment system is designed to protect the rest of the house, but no one wants to live next to an active work zone.
Clear personal items from the affected room if they’re not contaminated, make sure we have clear access to the work area and the electrical panel, and if you have pets, keep them out of the work zone during active remediation. We handle everything else: containment, removal, drying, and cleaning. If there are items inside the contaminated area, we’ll advise you on what’s salvageable during the inspection.
We dispatch same-day or next-morning for most Pomona mold calls, especially when visible mold or standing water is present. The faster we inspect, the faster we can contain the growth and stop it from spreading through your HVAC system. Call (888) 508-8745 and we’ll schedule your assessment immediately. Noel Carrasco and the team are ready when you are.
Schedule Your Mold Remediation Service in Pomona Today
If you’ve seen mold, smelled it, or just have a water stain that makes you uneasy, call (888) 508-8745 now for a free, no-obligation estimate. We’ll inspect your Pomona property, explain exactly what we found and what it costs, and give you a written scope before any work starts. Clean Slate Water Damage is ready with professional-grade equipment and IICRC-aligned process. The sooner we get there, the less damage there is to remediate.
Written by Noel Carrasco, Owner at Clean Slate Water Damage, serving Pomona and the surrounding Inland Empire.